Sanitary Pump

Sanitary Pump



Ginhong is a professional sanitary pump supplier in China manufacturing different kinds of industrial sanitary pumps, which are widely used to transfer semi-solids and liquids in cosmetic, pharmaceutical, food and chemical industries. Follow the product links below to learn more about each Ginhong sanitary pump.

Request A Quote for more details


What are Sanitary Pumps?


Cleanliness, safety, quality and service are all essential values in making food, pharmaceutical, chemical or cosmetic industries stay on top of the line for decades. It’s what keeps customers’ trust and loyalty. That is why Ginhong is dedicated in making sure that everything is spic and span in manufacturing their equipment and that the methods of manufacturing products by their mixers are also sanitary and result in the highest quality. Healthy and clean mixing processes are carried out by Ginhong Mixers with the use of the different types of Sanitary Pumps they offer.

Ginhong has a reliable line of pumps to cover the most demanding industrial, scientific and sanitary applications. These Sanitary Pumps are capable of metering, processing and delivering products such as food, colloids, powders and agricultural materials in a mixing system with utmost cleanliness and reliability.

Ginhong offers two types of Sanitary Pumps; a Rotary Lobe Pump and a Centrifugal Pump. They provide a selection of models for both the LP Rotary Lobe Pumps and CP Centrifugal Pumps depending on the physical, mechanical and chemical properties of the material to be processed. Their in-house engineers will evaluate and determine your pump requirements in a sketch or blueprint, offering you design suggestions that will lower production cost.


About Rotary Lobe Pumps


Configurations Available:

The most common configuration of this type of pump contains two lobes within the chamber with separate external driven timing gears mounted on two shafts. With this arrangement, the two pumping gears do not contact each other, and the unit is more suitable for liquids with viscosities between 5,000-100,000 cps. Lobe options may also include tri-lobe and multi-lobe depending on the materials to be carried.

Advantages:

The LP Rotary Lobe Pump series has the combined attributes of the following:

  • a positive pressure of the piston pump and advantages of the centrifugal pump such as compactness, simplicity and wide speed range.
  • offers self-priming performance. A gentle pumping action minimizes product degradation.
  • offer reversible flows and can operate dry for long periods of time.
  • Output is constant and continuous as it is independent of changes in process pressure

For many applications, the advantages of rotary pumps have resulted in the near exclusion of all other types of pumps.

Applications:

Rotary Lobe Pump units are used to transfer large but delicate items such as cherries and molasses. They are frequently used in food applications, because they handle solids without damaging the pump. For this reason, Rotary Lobe Pumps are commonly used for the following industries:

  • Pulp
  • Paper
  • Pharmaceutical
  • Chemical: Soaps and surfactants; Paints and Dyes; Rubber and adhesives
  • Food and Beverage

What are Ginhong LP Rotary Lobe Pumps made of

In general, these LP series of lobe pumps are equipped with two rotors, pump chamber, mechanical seal, transmission part and geared motor for each unit. The body of the rotary lobe pump is mounted on a stainless steel base.

The lobes are made of food grade, FDA approved elastomers. All contact parts are made of Stainless steel 316L, which is far better than other common stainless steel types, as it is coated with Molybdenum to be more corrosion resistive.

Ginhong uses Stainless steel in their Sanitary Pumps as its properties are more advantageous as compared to standard plain carbon mild steel. Stainless steels have higher corrosion resistance properties, higher cryogenic toughness, higher ductility and lower maintenance is needed.


How Ginhong LP Rotary Lobe Pumps Work

Ginhong LP Rotary Lobe Pumps work very simple. As an essential auxiliary machine for Ginhong Vacuum Emulsifiers, High Shear Mixers, Planetary Mixers, Lab Mixers, Multi-Shaft Mixers, these pumps are sandwich internally in the system. An inlet port is connected to the manufacturing vessel and an outlet port is connected to the storage vessel for the transfer of product.

The circular impeller accelerates water or other liquid to the outer periphery of the elliptical casing. Gas from the intake port is trapped in the space between adjacent blades and as this space is turned toward the discharge port, the liquid in the partially filled cylinder acts as a piston to compress the gas. This type of pump serves well as a vacuum pump.

The impellers are held in correct alignment by gears external to the casing so that there is no rubbing between the impellers themselves or between the Impellers and casings. The internal surfaces run dry.


About Centrifugal Pumps


Unlike Rotary Lobe Pumps, Centrifugal Pumps uses a powerful rotation of the impeller to move materials and fluids out of its discharge port. This type of pump is more suitable for medium to low viscosity fluids such as water, solvents, organics, oils, acids, bases and any thin liquids in chemical, pharmaceutical, food, agricultural and domestic applications.


Advantages/Benefits:

Ginhong Centrifugal Pumps have the combined attributes of the following:

  • Design in simple
  • Can be used for applications where suction is not really required
  • Move at high speeds with minimal maintenance
  • Low cost

Application:

Ginhong Centrifugal Pumps can be used for the following applications involving low viscosity fluids:

  • Food-processing, dairy, beverages – winemaking
  • Pharmaceutical
  • Cosmetic

What are Ginhong CP Centrifugal Pumps Made of

A Centrifugal Pump is a very simple machine consisting of only two parts: the casing and the impeller. Other subparts are the seal, impeller bearings, motor, coupling, shaft-drive and shaft seal. Ginhong manufactures the impeller and all contact parts using Stainless steel 316L, which is far better than other common stainless steel types, as it is coated with Molybdenum to be more corrosion resistive.

Ginhong uses Stainless steel in their Sanitary Pumps as its properties are more advantageous as compared to standard plain carbon mild steel. Stainless steels have higher corrosion resistance properties, higher cryogenic toughness, higher ductility and lower maintenance is needed.


How Ginhong CP Centrifugal Works

In a centrifugal pump, the liquid is forced, by atmospheric or other pressure, into a set of rotating vanes which constitute an impeller discharging the liquid at higher pressure and higher velocity at its periphery. The major portion of the velocity energy is then converted into pressure energy by means of a volute or by a set of stationary diffusion vanes surrounding the impeller periphery.

If the casing and impeller of the centrifugal pump stand full of the fluid that is to be handled and the impeller is set in motion, the centrifugal force of the rotation will tend to throw outward into the casing the fluid that is contained in the impeller.


Quality Control


All Sanitary Pumps manufactured by Ginhong adheres with Cleaning-in-place regulatory requirements in which interior surfaces of pipes, vessels, process equipment, filters and associated fittings can be cleaned internally without disassembly.

This makes Ginhong Sanitary Pumps more efficient than other competitors as maintenance is reduced and sanitary requirements are fulfilled accordingly.

In addition, Ginhong manufactures products complying with Current Good Manufacturing Practice (CGMP) regulations enforced by the FDA. CGMP is vital for quality control of manufacturing plants as it entails proper design, monitoring, and control of manufacturing processes and procedures.

Adherence to the CGMP regulations assures the identity, strength, and quality of manufacturing operations. CGMP also establishes strong quality management systems, robust operating procedures and investigating product quality deviations.

Industries Served



Cosmetic


Pharmaceuticals


Food & Beverage


Chemical

FAQs


1What kinds of mixer machinery do you manufacture?
Ginhong specialize in manufacturing vacuum emulsifying homogenizers and high shear mixers for semi-solids/creams and liquids. Liquid/liquid and liquid/powder are the main applications. We also make some horizontal ribbon mixers for powders.
2What’s the delivery time?
Generally speaking, the delivery time is between 30 to 60 days for vacuum homogenizer mixer and multi-shaft mixer. For mixing tank, homogenizer and high speed disperser, the delivery time is between 30 to 45 days. Anyway, it all depends how busy we are when you put the order. We can overwork to finish your mixer machinery if you have special requirements on delivery time.
3How about the quality of the mixer?
We’ll test every mixer before shipment to ensure it works well whether you come to inspect it or not. It will not be shipped if it has any problem. So you don’t need to worry about the quality. Actually some customers haven’t come to our factory yet although they had placed several orders from us.
4What is the payment term?
Generally, we take 30% of total amount as down payment, which should be wired by T/T. The 70% balance will be paid by T/T after you inspect your mixer system before shipment. We also accept letter of credit although it takes more expenses. But our bank should confirm your opening bank’s credit first.