This video was taken during the pharmaceutical cream production and discharging process by 400L RX design vacuum homogenizer mixer with Siemens PLC automation in one of largest pharmaceutical companies in Karachi, Pakistan.
Pharmaceutical cream is usually made water and oil which is same as other emulsions. Our RX design vacuum homogenizer mixer is quite suitable to make it and it’s also good for making ointment which is composed of oil and wax.
For this 400L mixer, Siemens PLC, touch screen, pneumatic valves and programming are included to make the system semi automatic. For example, we firstly set the heating temperature at 80 degrees Celsius on the touch screen, then we press the steam heating button. The steam will start heating automatically until it reaches 80 degrees.
Or if we want to set the homogenizer to work under 50Hz for 10 minutes, we just set the two parameters on the touch screen and then press the homogenizer start button. The homogenizer will start running automatically and stop after 10 minutes. All is done automatically as long as you pre-set the parameters.
The bottom homogenizer in our RX design mixer is also capable of discharging finished pharmaceutical cream because of its strong pumping function. You close the return valve back to the tank in the circulation piping and open the discharging valve. When the homogenizer runs, it produces strong centrifugal force and pushes the cream out of the manufacturing tank.
Ginhong is one of the leading Chinese supplier manufacturing several different kinds of vacuum homogenizer mixers for making pharmaceutical cream. To understand more about pharmaceutical cream process, please go to the page: https://www.ginhong.com/products/rx-vacuum-homogenizer-mixer/