How to operate vacuum emulsifying equipment

You are here: Home » Articles » How to operate vacuum emulsifying equipment

The standard emulsifying equipment has a number of essential components and parts; these are pan, racks, main pots, electrical control systems, water boilers, vacuum systems, and hydraulic systems. Every part is vital to ensure the proper operation of this machine as well as maximum emulsifying benefits.

Step by step procedures on how to operate the vacuum emulsifying machine

1. First of all, it is important that a machine is located at a stable ground to ensure safe and steady operation.

2. You can now turn the power of the emulsification. This will turn on its power control indicator.

3. See to it that the pipes of the homogeneous pan, overflow, outfall, drain port component, among other essentials of the emulsifying machine, have been properly connected.

3. Before you perform the vacuum extraction process, check if emulsifying equipment is stuck to its lid. Also, the valve interfaces found at the lid must be properly closed; after which you can now open the vacuum valve as well as the vacuum pump. As soon as the machine meets the vacuum requirements, you can now turn off the pump. Immediately afterwards, you may also turn off the valve of the vacuum.

4. After turning off the vacuum valve, you have to open the control switch of the machine. This allows you to have full control of the operations of the homogenizer and stirred scraper. Open the switch as soon as you feed in the mixture components.

5. It is important that you check if the vacuum homogeneous lid is sealed before you start with the operation. In case, you need to open that atmospheric pump, this condition must not last for over three minutes.

6. Vacuum machines will not properly operate without any fluid. Likewise, see to it that its vents are not blocked when its pump is in operation.

How to care for and maintain the quality of emulsifying equipment

1. It is not only important that companies acquire excellent-conditioned emulsifying machines; but, it is a must that they maintain such condition to ensure the production of quality mixtures. One effective way of proper care and maintenance is by performing inspection on a regular basis. All parts and components must be thoroughly checked. Bearing parts must be sufficiently greased and lubricated. Oil must be regularly cleaned and replaced as well.

2. Homogenizer must be kept clean always. See to it that the homogenizer part that is in contact with the fluid must be always clean and well-maintained. Other vital parts that should be properly maintained are the cutting wheel, sliding sleeve bearings, cutting sleeve on head, and bushings. They must be disassembled and cleaned individually for best results. Reassembly must be done precisely and carefully to ensure that you enjoy optimum operation from the machine.

3. When emulsifying equipment is being cleaned, it must be done while referring to the standard procedures found at the equipment manual. As much as possible, cleaning work must be assigned to a professional technician to ensure maximum care and cleaning of the machine.

Other Items in this category
Follow us on Facebook  Twitter  LinkedIn  YouTube  Bookmark and Share     
Copyright © 2014 Jinhu Ginhong Machinery Co., Ltd.. All rights reserved. Terms of Use  |  Privacy Policy  |  Sitemap